[PDF]Inventory Control

PowerPoint presentation on inventory
control


guide: dr r.n kulkarni
pg student: dr. saiprasad bhavsar
dr. shilpa S.


INVENTORY CONTROL


aWebster's has defined Inventory as
“The quantity of goods or the materials
on hand”

4Goods or the materials is the essential
element of any of the organization right
from hospital, industry, private enterprise
or the government department.


aThus inventory control is the method of
maintaining of stock at a level at which
purchasing and stocking costs are at the
lowest possible without interference with the
Supply.

oThus tt plays the vital role in maintaining the
balance between the two.


alf the items like drugs are purchased in the
large quantity, the supply can be made easily
and immediately.


oThe risk of the Out-Of-Stock is avoided.


LJUT LIT MIOUN V æI ILAJ Y ID LIETCAL eS hd VWLYUIUIN
amounts to the locking up of the money
which would have been spend more gainfully
in some other ways.


A large stock will also imply a large storing
space and will require a staff to store and
handle various items.

There is the danger of the drugs not being
utilized before the date of expiry, of
pilferage, of the stock lost some sight and


not being utilized, better and cheaper
substitute available.


alt is generally accepted that total yearly
carrying cost on the inventory is 20-25%.
Thus inventory control has the objective
of maintaining optimum stock- neither
excessive nor likely to be exhausted.
oFollowing are the various methods to
store the items based on their cost and
utility.


ABCANALYSIS OF THE DRUGS


aThis is the system of analysis of store
items mainly drugs based on their cost
in material management.


altems can be categorized into three
groups based on their annual
expenditure incurred on these items.


oFirst the list of the drugs showing the
expenditure incurred in the previous
completed year is prepared

aThen the drugs are arranged in the


descending order of the amount of the
expenditure.


aThen the cumulative cost should be
calculated beginning from the first item
of list.


oWhen such cost is found out, about
10% of the items will be seen to
consume /0% of the budget, and these


are called Group A Items.

aGroup B Item form about 20% of the
total item and account for the 20% of the
budget.

aGroup C consists of the remaining 70%
of the items consume only 10% of the
budget.


aThus it can be easily judged that the


category A should get high priority and


managerial attention because though
constituting only small fraction of the


total list it amounts for the bulk of the
expenditure,

oTheir stock, consumption, purchase
should be critically watched and
controlled.


VEDANALYSIS


oAnother method of classification of drugs or
materials is grouping them according to


criticality in patient care.

a’V" Items are vital drugs, without
alternatives, forming about 10% of the total
drugs whose absence cannot be tolerated.
Every attempt is to be made, at whatever
cost, to avoid the Out-Of-Stock position of
these drugs.


2“E” Items are the Essential items that
constitute 40% of the items and their absence
can be tolerated for the short stretch of time.
They could be made available in a day or two
or the alternative medicine can be made
available.

2“D” items are the desirable items which are
the remaining 50% of the drugs and their non-
availability can be tolerated for longer period.
aThey may be required for chronic and less
serious patients.


Combination of ABC and VED Analysis
can be explained in the following way


Category | 15% Items


Category Il 40% Items
Category III 45% Items


aThus drugs in Category | are either Vital
or expensive and should be managed
with maximum attention.

aConsumption and its stock should be
continuously monitored and safety stock
should be kept at low to reduce the
carrying cost.


aCategory Il consists of drugs, which are
essential, and of average cost.


aThey can be managed with little less
priority and can be managed with middle
level managers.


aCategory Ill consists of the drugs which are
desirable and inexpensive and thus lowest
in the hierarchy of priority. They should be
purchased periodically and buffer stocks can
be high managed by lower level of
management.


HMLANALYSIS


The Items are classified according to
High Cost, Medium Cost and Low Cost

Criticality and Cost can be coupled in
Coupling Matrix Module.


Defibrilator X-ray Machine Air Curtain
Ventilator Electric cautry USG machine
Oxygen Patient trolley | Electronic BP


regulato ap


S D E ANALYSIS


aln situation where scarcity of items Is
not uncommon SDE Analysis is helpful.
a“S” refers to Scarce items which are
know to be in short supply because of
the various reasons

a“D” items are of Difficult items which
may be difficult to obtain in in adequate
quantity or quality immediately.


4 “E” items are items which are easily
available and no difficulty is experienced
in purchase and procurement.

2 SDE Analysis helps to avoid Out-OF-
stock position of items by management
with reference to their free availability.


F S N ANALYSIS


aln this analysis the quantity and rate of
consumption is studied and categorized
accordingly


oF Items are fast moving items that have
large consumption


2S Item are slow moving item
ON Item are non moving items


aNon moving items which are in stock and not
consumed over a long period lock up space
and fund and may have to be condemned
because of time barred or obsolete.


Such items are to be identified and disposed
off and care to be taken so that they are not
ordered ordinarily.

aThe reason for their non utilization are to
be studied

4Big hospitals notice around 10-15% of items
as non moving items.


METHODS OF ORDERING


aThere are different systems in use to
order items. Some of them are as
follows.


4A) Two bin system
2B) Cyclic system


41) Two Bin system:-

in this system orders are not placed
at fixed periods but are placed when the
stock of the item reaches a certain


predetermined level.
For fixing this level the information
on following is essential.


41) Lead Time:- This is defined as the average
interval between placement of order for supply
of some item and actual receipt of the material
for use. Further classified into two


aa) Internal lead time:- This is the time gap
between the start of the preparation of the
demand of material to the time of dispatch of
order.

ab) External lead time:- time from dispatch of
aii to the receipt of the supplies is called


ac) Total lead time= ILT+ELT


a2) Minimum order level:- This is the quantity of


material derived by calculating average daily
consumption of the material and multiplied by
total lead time

oFor example avg daily consumption of the 5%
dextrose is 50 bottles and the total Lead Time
is 30 days the Minimum Order Level is 1500
bottles. Avg daily consumption” Total Lead
Time

alf you have less then that then u are bound to
face Stock-Out condition.


23) Buffer Stock:- In addition to the
minimum order level we need to have
something in extra to meet out any
extingency. Calculated by the formula

2 BS= (Max daily consumption- avg daily
consumptions)* Total Lead Time.


24) Reorder level:- This is the point
where we have to place the order for
procurement for replenishing the stock
derived by the formula


(Minimum Order Level+ Buffer Stock).


45) Maximum Order Level:-this is the
maximum quantity of the material to be
stocked, beyond which the item must
not be inventory.


a2) Cyclical System:-In this system stock of
various items are checked with certain
periodicity to find out the consumption
pattern and the balance in hand so as to
place order to bring up the stock to the
desired level. In this periodic ordering
system, the inventories are regulated by
quantities ordered each time, the period
between the order remain the same.


PROCEDURE OF ISSUE


aln big institutions the indents are to be
made on the basis of the written indents,
received from competent personal.

aln the teaching institutions following
methods can be used.

oA) direct supply to the wards, OPD and
dispensary from the main stores of indents.
4B) one more step in distribution is to
include a Floor pharmacy or a Sub store.


o“FIFO” Principal i.e. “First In First Out”
principal should be followed.


aThis means that the store is to be arranged
in such a way that the items which are
received earlier are to issued out first.

aThis method has to be used to prevent the
non-use of the earlier stock, which may get
time-barred and may have to be condemned.
4A simple method followed is to keep the
newly arrived stock on the shelf at the back so
that the old stock can be used first.


aln case of the contraceptives two type of system or
their combination is used for issue.


41) Push or Allocation system :- supplies are
allocated down the distribution network from supply


depot to the intermediate warehouse to the final
outlet. Thus the stock is pushed out

aln this system the decision regarding the regulating
the flow of contraceptives are done at higher level
alt thus do not require much training of the personal
at the field level as they are not responsible for
ordering their own supplies and thus eliminates the
occurrence of unrealistic orders from the periphery.


oThis however requires the timely reporting from the


4 In Pull or Requisition system :- The demand and
indent from the peripheral outlet draws supplies from


the Central stores.


2 It requires much training of the personal at field
level and there is a chance of occurrence of
unrealistic stock order. It also requires the timely
reporting from the periphery

4 The mixed system is also useful where the
intermediate warehouse will Indent or Pull the stock
from the Central store and further down it will
Allocate or Push the stock to the outlet.


MAINTANANCE REPAIR AND
CONDEMNATION


aThe preventive maintenance of the equipment
including the transport equipment is a must.


aln most states a separate State Health Transport
Organization (SHTO) is functional to take care of the
vehicle belonging to the public health system.

aThe objective of prime importance Is to keep the
maximum proportion of the vehicles roadworthy at
any point of time. Lack of mobility of the health team
interferes very seriously with effective health care.


Preventive maintenance of the health equipment
including the sophisticated expensive equipment is
must and should get the due care it deserves.
oLogbook to indicate the utilization of the equipment
should be maintained.

Repairs of the medical equipment should be done
in time.

oArrangement for storing the spare parts is to be
made.


oProcess for condemnation of the unserviceable
articles are to be laid down.


aThis procedure may require the constitution of a
Condemnation Committee or an officer may inspect
and certify for condemnation.


aGenerally an officer competent to purchase an
equipment in terms of financial power is competent
to condemn itt.

Depreciation value of the equipment is to be
calculated by applying the rates of depreciation to
the various categories of items.


4Replacement can be purchased from the


alf the process of condemnation is not streamlined,
unserviceable have to be stored for a long time
occupying the precious space.

Unless an article is condemned the process for its
replacement by using the depreciation fund or the
other fund do not start.


4As advod HQ RMAFON YE LEM the court is accepted


as the truth what is written on the paper’.


aRecords of the total procedure followed for
processing purchase have to be meticulously
maintained. This is very important in case of
defending a claim made against the competent
officer.

3A Bin Card which is a record of receipt, issue and
Stock at hand, should be prepared and maintained
separately for each item.

No difference should be found in the stock as
shown in the Bin Card and physically available on


a


aThe responsibility of maintaining the Bin Card is to
rest on the Officer I/C of the store.


oStock verification is to made periodically else the
discrepancies will go unnoticed.

aln addition of the yearly stock checking the Spot-
Checking can also be done to help detect
discrepancies and give an indication of Pilferage
especially of expensive equipments.


Records should be available for showing the stock


turnover with reference to items with expiry dates.
oFor the items getting time barred, action can be
taken to ensure timely utilization of the stock


IT TECHNIQUE


aTaichi Ohno of Toyota is considered as the father
of JIT Technique (Just In Time Technique).


aThe JIT emphasizes that the inventories are a
result of faulty technique used at various levels and
we have to analyze these faults and treat the same.


aThe causes of faulty inventories are :

>Faulty sales forecasting

>Rigid production batch quantities

»>Bureaucratic time consuming purchase procedure
>Order on unreliable suppliers


>Long lead time

>Wrong transportation methods

>Poor coordination between different units
>Vested interest of the purchase department


>Release of the budget at the end of the year
perticularly in the public sector.


>JIT philosophy promotes that instead of acquiring
inventories; there should be perfect coordination
among the different subsystem of material
management like that from the level of demand
estimation to the distributors to the level of users.


>Every subsystem must have got beforehand
information that which item at what quantity is
required, where it is required and when it is required.
>Exactly at the time of requirement it is supplied to
the user unit without delay.


>This is possible only when there is fool proof
system of Material Requirement Planning (MRP)
and effective use of the computers and information
technology supports the JIT.

>The reduction in the production cost achieved by
many such practices along with the technical
excellence has placed the TOYOTA MOTORS at the
second position of supplier in the Automobile market
of USA in 2007.


THANK YOU